MS100
Every Sodick’s injection moulding machine comes with two-stage plunger injection system (V-LINE® System) which is designed on three critical principles: consistent plasticizing heat profile, constant filling volume and constant holding pressure. These principles work in perfect harmony to achieve ultra-precision injection moulding.
Electric V-LINE®
The injection and plasticizing apparatus using the V-LINE® system, with characteristics that ensure precise reproducibility, is now powered by a servomotor. Measurements and positioning data for the injection locations are controlled in a closed loop to improve the precision of positioning, achieving remarkably stable repetitions of the plasticizing, measuring, and injection cycle. The line of injection units with plungers of 28 mm and 40 mm in diameters include models that emphasize speed and models that emphasize pressure, allowing you to choose the unit that best suits the moulded product type.
Electric clamping action
With the servo motor drive and adoption of the mould clamping device by the original toggle link mechanism shortened the mould opening and closing cycle. The movable platen is supported by a linear guide to improve the stability of the mould orientation. The power design for these products significantly reduces power usage while contributing to quieter operation.
Operation panel focused on intuition
Offering selector type switches, the control panel has been developed especially for the MS100. The ability to move the switches in the same direction in which you want each unit to move results in a more intuitive operating experience and helps simplify moulding operations.
| Technical Specification | ||||
|---|---|---|---|---|
| Max. clamping force (kN) | 980 | |||
| Tie bar distance (W x L, mm) | 460 x 420 | |||
| Platen dimension (mm) | 640 x 610 | |||
| Open daylight (mm) | 800 | |||
| Min./ Max. die height (mm) | 200 / 450 | |||
| Max. weight of tool (kg) | 600 | |||
| Screw diameter (mm) | 28 | 32 | 40 | |
| Plunger diameter (mm) | 28 | 40 | ||
| Max. injection specific pressure (MPa) | 215 | 285 | 160 | 215 |
| Max. injection rate by volume (cm3/s) | 246 | 185 | 339 | 251 |
| Max. injection stroke (mm) | 160 | 200 | ||
| Machine dimensions (L x W x H, mm) | 4,240 x 1,215 x 1,748 | |||