Wide taper angle machining with HYAC (Hyper Angle Control)
| Data | |
|---|---|
| Wire diameter | Ø 0.25 |
| Workpiece material | NAK55 |
| Thickness | 200 mm |
| Taper degree | 36.5 degrees |
| Surface finish | 0.6 µm Ra |
| Machining time | 30 h 12 min |
| Dielectric fluid | Water |
| Data | |
|---|---|
| Wire diameter | Ø 0.25 |
| Workpiece material | NAK55 |
| Thickness | 200 mm |
| Taper degree | 36.5 degrees |
| Surface finish | 0.6 µm Ra |
| Machining time | 30 h 12 min |
| Dielectric fluid | Water |