AQ750L Premium

AQ750L Premium
10 Years guarantee

The EDM colossus with four linear axes

All the advantages of linear technology, also for the machining of workpieces up to 1500 kg – the AQ750L Premium makes it possible!

The linear motors specially developed by Sodick for Sodick for all the Sodick EDM range show what economic efficiency really means. The surface quality is enhanced to Ra 0.25, and at the same time the energy consumption is cut by approximately 40%!

In response to the growing demand for large dies spurred by the huge popularity of large screen TV's, the AQ750L Premium, also equipped with LP2WH Power supply have been designed especially for machining large size dies for large size components as well as for automobile parts such as instruments, panels and bumpers. As an optional extra, the AQ750L Premium is now available with a submerged cutting height of 600 mm.

Product data sheet AQ750L Premium (pdf, 0.36 MB)

Technical Specification
X/Y/Z axis travel (mm): 750 x 500 x 400 (Z=600 optional)
U/V axis travel (mm): 770 x 520
Work tank dimensions (W x D x H, mm): 1264 x 973
Max. workpiece weight (kg): 1500
Distance from floor to table top (mm): 1000
Machine tool dimensions (W x D x H, mm): 2100 x 2860 x 2390
Machine installation dimensions (mm): 3200 x 4160
Machine weight (kg): 5600
Taper angle: ±30°
Wire diameter (mm): Ø0.15~Ø0.33
Wire tension (N): 3~23
Max. wire speed (mm/sec): 420
Max. workpiece dimensions (W x D x H, mm): 1050 x 750 x 400
Controlled axis: 5
Dielectric Tank
External dimensions (W x D x H, mm): -
Weight empty (kg): 900
Capacity (l): 1265
Filtration method: 2 replaceable paper filters

Features

  • 10 year warranty on positioning accuracy
  • Linear motor (X, Y, U, V axis)
  • Linear glass scales (X, Y, U, V axis)
  • Ceramic components
  • Linear motor cooling unit
  • LP2WH high speed generator
  • Intelligent Q3vic EDW
  • Remote controller
  • Esprit CAM software offline (regional option)
  • Automatic Tank Door
  • Work stand bridge
  • Improved Ease of Operation
  • High speed electrolysis free circuit
  • Energy saving circuit
  • SODICK Fine Corner Control
  • FTII (Fine pick-up function)
  • Automatic water level control
  • Super jet AWT (Automatic wire threader)
  • Wire end remover
  • Wire chopper
  • Receiver for max. 20 kg wire coils
  • Dielectric cooling unit
  • Active Power Restart (UPS)
  • Voltage stabiliser
  • LAN interface
  • 15" TFT screen
  • Totalising hour metre
  • Work light
  • USB port

Options

  • High Column (AQ750LH)
  • Taper flex 45 (for taper cutting up to 45°)
  • Oscilloscope
  • 6/8-axis simultaneous (factory option)
  • Custom colour
  • WS4P/5P rotary table (indexing or simultaneous movement)

Samples

  • 3-part interlocking involute

    3-part interlocking involute

    3-part interlocking involute
    Wire diameter ˜ 0.20
    Workpiece material SKD11
    Thickness 70, 100, 120 mm
    Surface finish 0.40 µm Ra
    Machining time 3 h 25 min/part (70 mm) 4 h 25 min/part (100mm) 5 h 10 min/part (120mm)
    Dielectric fluid Water

  • Sample AQ750L/AQ900L

    Sample AQ750L/AQ900L

    Sample AQ750L/AQ900L
    Wire diameter 0.30mm
    Workpiece material SKD11
    Thickness 280mm
    Accuracy +/- 2.0µmRa
    Surface finish 0.24µmRa
    Cutting Time 10h 10min

  • Wide taper angle machining with HYAC (Hyper Angle Control)

    Wide taper angle machining with HYAC (Hyper Angle Control)

    Wide taper angle machining with HYAC (Hyper Angle Control)
    Wire diameter ˜ 0.25
    Workpiece material NAK55
    Thickness 200 mm
    Taper degree 36.5 degrees
    Surface finish 0.6 µm Ra
    Machining time 30 h 12 min
    Dielectric fluid Water

Brochures & Downloads

AQ750L / AQ900L / AQ1200L

8 pages 04/2014