HS430L

HS430L

Sodick's high-speed linear machining centre.

As a pioneer in the use of highly dynamic linear drives in machine tools, and based on years of experience with over 10,000 linear EDM machines, Sodick is presenting a new generation of high-speed linear machining centres with linear drives in all axes – the HS L series

High acceleration rates > 1G, maximum stability and the highest degree of precision down to the nano realm are the top attributes of this innovation, which heralds a new era in milling tools. Not least because the handling of the machine is extremely easy and safe, thanks to the Windows-based CNC controller combined with Sodick Motion Control software.

Unlike the conventional method of separately executed rough and fine milling, this new technology combines both these machining passes in the one operating mode. The solution is a rapidly rotating and traversing tool of small diameter that cuts to fine depths.

Fine depth milling

Small diameter cutting tools are ideal for minimising the cusp (residual surface roughness after cutting) and therefore milling resistance. The result is enhanced dimensional accuracy, surface finish, and tool life.

High Speed Milling

High-speed milling shortens cycle times and therefore the whole machining period. Other advantages are improved surface qualities, multi-purpose tools, and minimising chip sizes for ease of disposal. In addition, this technology does not require coolant, so dry (semi-dry) machining is also possible.

Product data sheet HS430L (pdf, 0.17 MB)

Technical Specification
X/Y/Z axis travel (mm): 420 x 350 x 200
Table dimensions (W x D, mm): 750 x 500
Machine tool dimensions (W x D x H, mm): 1500 x 1625 x 2105
Machine installation dimensions (mm): 2200 x 3175
Machine weight (kg): 5800
Spindle speed (min⁻¹): 6000 ~ 40000
Max acceleration X/Y/Z axis (G): >1
Rapid feed rate (m/min): 36
Maximum tool diameter (mm): Ø6
Tool holder capacity: 16
Maximum load on table (kg): 120

Features

  • 3 Axis Linear Motor Drive
  • Spindle Temperature Controller
  • Linear Motor Temperature Controller
  • Semi-Dry Coolant System
  • Oil Base Coolant Option
  • ATC 16 Tools
  • Bed Wash Down System
  • Auto-Lubrication System
  • Automatic Shut Down
  • Work light
  • High Speed High Accuracy Function (SEPT II - Sodick Enhanced Precision Technology)
  • Hard Disk 30.0 GB
  • Macro Function
  • Programme Memory Size 30MB
  • Ethernet
  • Touch Sensor ASSY (BIG, workpiece positioning function)
  • Mist Collector (AMANO)
  • Automatic Tool Length Measuring System - BLUM (non contact type)
  • Cleaning Gun
  • Tool Tip Cleaning System

Options

  • workpiece changer AWC 30/AWC 60
  • Tool changer ATC 45
  • Tool holder E25/E32

Samples

  • Copper electrode with small rib

    Copper electrode with small rib

    Copper electrode with small rib
    Machine tool HS430L
    Workpiece material Cu
    Size Rib width: 0.2 mm
    Rib height: 15 mm
    Machining time 134 min
    Rough: 48 min
    Finish: 86 min
    Machining condition Spindle speed: 20,000 – 30,000min- ¹
    Feed rate: 500 – 2,000 mm/min
    Cutting tool End mill
    Machining time of concavity 5 h 10 min
    Dielectric fluid Water

  • Optical connector

    Optical connector

    Optical connector
    Optical connector HS430L
    Workpiece material NAK80
    Machining time 3h 30min
    Machining condition Spindle speed: 20,000 – 40,000min-¹
    Feed rate: 1,280 – 3,200 mm/min
    Cutting tool Taper ball end mill R: 1.0 x 1.5° x 10
    Taper ball end mill R: 1.0 x 1.5° x 7
    Taper ball end mill R: 0.3 x 1.5° x 5

  • Small hole drilling on fused silica

    Small hole drilling on fused silica

    Small hole drilling on fused silica
    Workpiece material Fused silica
    Size Hole dia.: f 0.4mm, Thickness: 0.6 mm
    Machining time 20.3 sec per hole
    Machining condition Spindle speed: 32,000 min-1
    Cutting tool ˜ 0.4 diamond coated drill 308 hole/tool

  • Mobile phone

    Mobile phone

    Mobile phone
    Machine tool HS430L / HS650L
    Workpiece material NAK80 (40HRC)
    Machining time 156 min 39 sec
    Rough: 54 min 42 sec
    Semi-finish: 15 min 5 sec
    Finishing: 86 min 42 sec
    Machining condition Spindle speed: 25,000 – 35,000 min-&sub1;
    Feed rate: 2,500 – 4,000 mm/min
    Cutting tool Ball end mill: R0.5
    Ball end mill: R1.0
    Ball end mill: R1.5

Brochures & Downloads

HS430L / HS650L / HS650L 5 axis

AG40/60/80 L
2 pages 07/2011